2x8 Banners

2x8 banners
FREE SHIPPING
WITH $100 ORDER
Banner Type
Vinyl Banners
13oz matte vinyl
hemming on all 4 sides
grommets every 2 feet across top & bottom
black grommets
Quantity
$50
1+ 5+ 10+ 20+ 50+
$50 $45 $40 $38 $33
1 day 1 day 1 day 2 days 3 days

Free Super Saver Shipping Banner

2x8 Banner Pricing and Materials

2x8 sized banners are our third longest thinnest banner we print. These eight foot wide and 2 foot thin banners are actually a perfect choice for adding a textual message to any horizontal surface. However, if you are looking for a vertical orientation and want a banner that could be draped from an average ceiling height to the floor, once could design a vertical layout to be printed on this banner to give you an eight foot hanging ceiling banner too. Because these banners are only two foot thin, they are best used for text banners for communicated a single message. By default we finish these 8 foot banners with heat welded hems and install mounting grommets on them to ensure you are able to easily install these 2x8 signs. However, you have other ideas for installing your banners in mind and do not want us to finish your banners with hems and grommets, please be sure to let us know you do not want these finishing options at the time you place your order.

Many other sizes available, see the all banner sizes page

13oz Vinyl
starting at $50
Most popular choice for promotional banners, these regular duty vinyl banners printed on 13oz bright white vinyl in matte or gloss finish and suitable for indoor and outdoor use for up to 2 years with proper care.
18oz Vinyl
starting at $50
A go to choice for banners to replace or compliment permanent signage, these heavy duty banners printed on thick matte heavy duty 18oz vinyl are suitable for extended outdoor use for up to 3 years with proper care.
Mesh Vinyl
starting at $75
These 8oz mesh banners are perforated with a micro hole pattern to allow the wind, light and sound through. They are a perfect solution for locations with high winds or with a requirement for partial transparency.
18oz Pole Pocket Vinyl
starting at $63
Printed on smooth lay flat 18oz vinyl, these banners come with clean cut edges and 4-inch pockets installed on top/bottom, left/right or top only, making perfect signage wherever pole installation is required. Pockets accept 2-inch round poles (poles not included).
18oz Double Sided Vinyl
starting at $80
These banners are printed on non transparent 18oz vinyl on both sides with either same or different image with clean cut edges. The highly opaque blockout layer insures no see through or image ghosting from side to side. Options include pole pockets.
2x8 Banner File Setup
Adobe Photoshop (also applies to all Raster Files)
- set up artboard to be 24” x 96” in inches (or 1/2 scale if necessary)
- set dpi to be anywhere from 100 to 300 dpi
- regular RGB or sRGB color space
- save as 100% quality jpeg file
Adobe Illustrator (also applies to all Vector files)
- set up canvas to be 24” x 96” in inches (or 1/2 scale if necessary)
- regular RGB, sRGB color space, or Regular CMYK
- embedded raster images should be at least 100dpi at actual size
- embed all raster images
- convert all text to outlines
- expand all strokes
- save as a pdf file
File Templates
Pixel Dimensions
- at 72dpi - 1728x6912 pixels;
- at 100dpi - 2400x9600 pixels;
- at 150dpi - 3600x14400 pixels;
- at 300dpi - 7200x28800 pixels;

As a general rule, the more detailed your artwork is, the higher DPI (pixel count) it should to be. For pictures and photographs, lower pixel/dpi counts are fine (72-100dpi). For text rich artwork, and for files with lots of details such as logos, maps, menus, etc, use higher pixel/dpi count (150-300dpi).

72 dpi is the minimum resolution we would recommend for printing, and the 300 dpi for the maximum resolution.